{"id":3048,"date":"2026-09-12T00:24:02","date_gmt":"2026-09-12T00:24:02","guid":{"rendered":"https:\/\/sentrimax.com\/decanter-centrifuge-vibration\/"},"modified":"2026-09-12T00:24:02","modified_gmt":"2026-09-12T00:24:02","slug":"decanter-centrifuge-vibration","status":"publish","type":"page","link":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/","title":{"rendered":"Why Is My Decanter Centrifuge Vibrating?"},"content":{"rendered":"<p><!-- SX-AIU:START --><\/p>\n<div class=\"sx-content\">\n<nav class=\"sx-crumb\" aria-label=\"Migaja de pan\"><a href=\"\/es\/centrifuge-troubleshooting\/\">Gu\u00eda de soluci\u00f3n de problemas de la centr\u00edfuga<\/a> \u203a <span>Why Is My Decanter Centrifuge Vibrating?<\/span><\/nav>\n<p class=\"sx-answer\">Decanter centrifuge vibration usually comes from one of four sources: product or cake build-up on the bowl or scroll, bowl imbalance, worn main bearings, or a loose or damaged foundation mount. Sentrimax Centrifuges recommends checking build-up and mounting first, since those are plant-level fixes, before assuming the bowl needs to come off for balancing or bearing work.<\/p>\n<h2>What decanter centrifuge vibration actually tells you<\/h2>\n<p>Vibration is not a diagnosis on its own &mdash; it is a symptom that four or five different<br \/>\nunderlying problems can all produce. What matters for narrowing it down is when it happens,<br \/>\nwhether it changes with speed, and whether it has appeared suddenly or built up gradually. A<br \/>\nvibration that scales directly with bowl speed almost always points to something rotating out of<br \/>\nbalance. A vibration that appears regardless of speed, or that comes with a specific knock or<br \/>\ngrind, points more toward a bearing or a mechanical looseness somewhere in the drivetrain or<br \/>\nmounting.<\/p>\n<p>Because a decanter centrifuge runs its bowl at speeds high enough to generate significant<br \/>\ncentrifugal force, even a small amount of asymmetric mass or bearing clearance shows up as<br \/>\nnoticeable shaking at the housing. That sensitivity is useful: it means vibration monitoring<br \/>\ncatches problems early, well before a bearing seizes or a scroll flight fails outright.<\/p>\n<h2>Process causes: check these before assuming the machine is broken<\/h2>\n<ul class=\"sx-check\">\n<li>Uneven or asymmetric cake build-up inside the bowl, particularly after a period of low feed<br \/>\nrate or an interrupted run<\/li>\n<li>Solids depositing unevenly on the conveyor flights rather than being carried through cleanly<\/li>\n<li>A sudden change in feed consistency or solids loading that the machine has not been tuned<br \/>\nfor<\/li>\n<li>Loose foundation bolts, worn isolation mounts, or a skid that has shifted since<br \/>\ninstallation<\/li>\n<\/ul>\n<p>Product build-up is the most common of these and the easiest to rule out. Flushing the bowl<br \/>\nand running clean water or a light feed for a short period will often clear an asymmetric<br \/>\ndeposit and bring vibration back down immediately. If vibration returns quickly after a clean<br \/>\nrun, the cause is more likely a genuine imbalance than a one-off build-up.<\/p>\n<h2>Mechanical causes: these need inspection, and often a shop<\/h2>\n<p>When cleaning the bowl and checking the mounting does not resolve the vibration, the remaining<br \/>\ncauses are mechanical:<\/p>\n<div class=\"sx-table-wrap\">\n<table class=\"sx-table\">\n<thead>\n<tr>\n<th>Vibration pattern<\/th>\n<th>Causa probable<\/th>\n<th>Typical fix<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Increases smoothly with bowl speed<\/td>\n<td>Bowl or scroll out of dynamic<br \/>\nbalance<\/td>\n<td>Three-plane balancing to ISO G 0.5, usually off-site<\/td>\n<\/tr>\n<tr>\n<td>Present at all speeds, low-frequency rumble<\/td>\n<td>Main bearing wear or early<br \/>\nfailure<\/td>\n<td>Bearing replacement &mdash; see the <a href=\"\/es\/centrifuge-bearing-failure\/\">bearing<br \/>\nfailure page<\/a><\/td>\n<\/tr>\n<tr>\n<td>Sharp knock at a fixed interval<\/td>\n<td>Damaged or loose scroll flight, or a foreign<br \/>\nobject in the bowl<\/td>\n<td>Disassembly and inspection of the conveyor &mdash; see <a href=\"\/es\/centrifuge-scroll-conveyor-wear\/\">scroll and conveyor wear<\/a><\/td>\n<\/tr>\n<tr>\n<td>Appeared right after a repair or part swap<\/td>\n<td>Rotating assembly not rebalanced after<br \/>\nthe change<\/td>\n<td>Rebalancing &mdash; see <a href=\"\/es\/centrifuge-imbalance-causes\/\">what causes<br \/>\nimbalance<\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Bowl imbalance deserves particular attention because it compounds. An out-of-balance bowl<br \/>\nloads the main bearings unevenly every rotation, which accelerates bearing wear, which in turn<br \/>\nincreases vibration further. A vibration problem that is left alone for weeks rarely stays a<br \/>\nvibration problem &mdash; it tends to become a bearing problem as well, and sometimes a scroll or<br \/>\ngearbox problem after that.<\/p>\n<h2>How to narrow down the source before calling anyone<\/h2>\n<p>A short, structured check at the plant resolves more vibration complaints than people expect.<br \/>\nStart by noting whether the vibration is present at low bowl speed during startup or only appears<br \/>\nonce the machine reaches operating speed &mdash; a problem that only shows up at speed points<br \/>\nmore toward imbalance, while one present throughout the speed range points more toward a bearing<br \/>\nor a mechanical looseness. Next, listen for whether the vibration has a distinct rhythm tied to<br \/>\none rotation of the bowl or scroll, versus a constant, speed-independent hum. A rhythmic<br \/>\ncomponent usually means something specific and localized &mdash; a build-up deposit, a damaged<br \/>\nflight, a loose fastener &mdash; while a constant hum across the whole speed range more often<br \/>\nmeans a bearing. Finally, check whether the vibration appeared suddenly, over a single shift, or<br \/>\ncrept up gradually over days or weeks. Sudden onset after a process upset or a foreign object<br \/>\npassing through the feed points toward mechanical damage; gradual onset points toward wear or<br \/>\nbuild-up accumulating over time.<\/p>\n<p>None of this replaces a proper inspection when the mechanical causes are in play, but it is<br \/>\nenough information to decide whether it is worth trying a bowl flush and a mounting check first,<br \/>\nor whether the pattern already looks like a bearing or balance problem that a flush will not<br \/>\nfix.<\/p>\n<h2>Duty cycle and how fast vibration tends to develop<\/h2>\n<p>Machines running continuously on abrasive or high-solids feeds &mdash; tailings dewatering,<br \/>\ndrilling mud treatment, produced water clarification &mdash; tend to develop wear-driven<br \/>\nimbalance faster than machines with more variable duty cycles, simply because there is less<br \/>\nopportunity to shut down, flush, and inspect between runs. Municipal biosolids operations, which<br \/>\noften run in batches with more natural downtime, tend to see build-up-related vibration more<br \/>\noften than wear-related imbalance, at least until the machine has accumulated significant run<br \/>\nhours. This is a reason to weight the build-up check more heavily on a batch-fed municipal<br \/>\nsystem and to weight bearing and imbalance checks more heavily on a continuously run industrial<br \/>\nsystem, without assuming either cause is impossible on either type of duty.<\/p>\n<h2>Why vibration and poor separation often show up together<\/h2>\n<p>An imbalanced or badly worn bowl does not just shake &mdash; it also changes how the pond<br \/>\nsits inside the bowl and how cleanly the conveyor moves solids through the beach. That is part<br \/>\nof why <a href=\"\/es\/centrifuge-poor-separation\/\">separation performance<\/a> often degrades at the<br \/>\nsame time vibration increases, even though the two look like separate complaints. If both are<br \/>\nhappening together, treat it as one mechanical problem rather than two unrelated ones.<\/p>\n<h2>What a Sentrimax inspection checks for vibration complaints<\/h2>\n<ol class=\"sx-steps\">\n<li><strong>Documentation and tagging.<\/strong> The reported vibration symptom, its speed<br \/>\ndependence, and any recent maintenance history are logged before disassembly.<\/li>\n<li><strong>Disassembly and 75-point inspection.<\/strong> The rotating assembly is steam cleaned,<br \/>\ncritical surfaces are polished, and every dimension relevant to balance and fit is measured<br \/>\nagainst OEM tolerances.<\/li>\n<li><strong>Balancing.<\/strong> Where imbalance is confirmed, the assembly is dynamically<br \/>\nbalanced to ISO G 0.5 as part of the standard repair process, not as an optional add-on.<\/li>\n<li><strong>Test run.<\/strong> The rebuilt unit is run and its vibration signature verified before<br \/>\nit ships.<\/li>\n<\/ol>\n<div class=\"sx-warn\">\n<h3>Cu\u00e1ndo detener la m\u00e1quina<\/h3>\n<p>Shut the centrifuge down rather than continuing to run it if vibration is increasing hour to<br \/>\nhour rather than holding steady, if it is accompanied by a new grinding or knocking noise, or if<br \/>\namplitude is high enough that nearby piping, guarding, or instrumentation is visibly moving.<br \/>\nContinuing to run an out-of-balance or bearing-damaged bowl at speed risks turning a bearing and<br \/>\nbalancing job into a full rotating assembly rebuild, and in severe cases risks a bowl failure.<\/p>\n<\/div>\n<h2>How coupling and drive type factor into vibration<\/h2>\n<p>The connection between the drive motor and the gearbox, and between the gearbox and the bowl<br \/>\nassembly, is another place vibration can originate that is easy to overlook when attention is<br \/>\nfocused on the bowl itself. A coupling that has developed play, a belt that has stretched or lost<br \/>\ntension, or a drive motor that has shifted slightly on its mount can all introduce vibration that<br \/>\nhas nothing to do with the rotating assembly&#8217;s balance condition. This is worth checking<br \/>\nalongside foundation bolts and isolation mounts, particularly on machines using a belt-driven<br \/>\narrangement rather than a direct-coupled drive, since belt tension changes gradually over time<br \/>\nand is easy to miss during a routine walk-through.<\/p>\n<h2>Common mistakes when diagnosing vibration<\/h2>\n<p>The most common mistake is treating a single vibration reading as conclusive rather than<br \/>\ntracking a trend. A one-time high reading taken during an unusual feed event tells you much less<br \/>\nthan a trend showing whether vibration is holding steady, climbing slowly, or climbing quickly.<br \/>\nThe second common mistake is adjusting more than one thing at once &mdash; flushing the bowl and<br \/>\ntightening foundation bolts on the same day, for instance &mdash; which makes it impossible to<br \/>\nknow which action actually helped if vibration improves. The third is waiting too long to check<br \/>\na bearing once vibration has been present across the full speed range for more than a short<br \/>\nperiod, on the assumption that it will resolve on its own; speed-independent vibration rarely<br \/>\ndoes. Working through causes in the order given on this page, one change at a time, avoids all<br \/>\nthree.<\/p>\n<h2>What a field visit can and cannot resolve<\/h2>\n<p>A field service technician can help confirm whether a bowl flush has actually cleared a<br \/>\nbuild-up deposit, check foundation bolts and isolation mounts, and take vibration readings at<br \/>\nseveral speeds to characterize the pattern described above. What a field visit cannot do is<br \/>\ncorrect an imbalance or replace a main bearing on site &mdash; both require the rotating assembly<br \/>\nto be removed and set up on dedicated equipment, which means a facility visit. Remote review of<br \/>\nvibration readings, run history, and photos is often enough to make that call before committing<br \/>\nto either a field visit or a shipment, which is why it is worth gathering that information<br \/>\nbefore reaching out rather than after.<\/p>\n<h2>Getting a Sentrimax opinion on a vibration reading<\/h2>\n<p>If in-plant checks do not resolve the vibration, the <a href=\"\/es\/centrifuge-troubleshooting\/\"><br \/>\nCentro de soluci\u00f3n de problemas de centr\u00edfugas<\/a> covers the other symptoms it is commonly confused with.<br \/>\nSentrimax can review vibration readings, run history, and photos to help decide whether the<br \/>\nmachine needs to travel for inspection or whether the fix is available at the plant.<\/p>\n<section class=\"sx-faq\">\n<h2>Preguntas frecuentes<\/h2>\n<details>\n<summary>Is some vibration normal on a decanter centrifuge?<\/summary>\n<div class=\"sx-faq-a\">\n<p>A running decanter will always have some baseline vibration from bowl rotation and process flow, and normal levels are steady rather than increasing. What matters is a change from the machine&#039;s own established baseline, not an absolute number, since every installation and foundation is slightly different.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Can I run the centrifuge while I investigate vibration?<\/summary>\n<div class=\"sx-faq-a\">\n<p>If vibration is mild and stable, short-term operation while you flush the bowl and check mounting is usually reasonable. If it is worsening over hours, or paired with new noise, stop and inspect first \u2014 see the stop conditions on this page.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Does vibration always mean the bowl is out of balance?<\/summary>\n<div class=\"sx-faq-a\">\n<p>No. Product build-up and loose or worn foundation mounts cause vibration just as often as true bowl imbalance, and both are easier and cheaper to fix. Rule those out with a bowl flush and a mounting check before assuming a balancing job is needed.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>How is a decanter centrifuge bowl rebalanced?<\/summary>\n<div class=\"sx-faq-a\">\n<p>Sentrimax rebalances rotating assemblies using three-plane dynamic balancing to ISO G 0.5, which is part of the standard repair process on every job that requires it, not a separate service. This is typically done with the assembly removed from the machine and set up on balancing equipment.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Why did vibration appear right after a repair or part replacement?<\/summary>\n<div class=\"sx-faq-a\">\n<p>Any change to the rotating assembly \u2014 a new scroll tip, a repaired flight, a replaced bearing carrier \u2014 shifts the mass distribution slightly. If the assembly was not rebalanced after the change, that shift alone is enough to introduce noticeable vibration.<\/p>\n<\/div>\n<\/details>\n<\/section>\n<section class=\"sx-cta\">\n<h2>Hable con un especialista en centr\u00edfugas.<\/h2>\n<p>Env\u00edenos los detalles de la m\u00e1quina y le enviaremos un informe de inspecci\u00f3n y un presupuesto.<\/p>\n<p><a class=\"sx-btn\" href=\"\/es\/contact\/\">Send vibration readings for review<\/a><\/section>\n<\/div>\n<p><!-- SX-AIU:END --><\/p>","protected":false},"excerpt":{"rendered":"<p>Decanter centrifuge vibration usually comes from one of four sources: product or cake build-up on the bowl or scroll, bowl imbalance, worn main bearings, or a loose or damaged foundation mount. Sentrimax Centrifuges recommends checking build-up and mounting first, since those are plant-level fixes, before assuming the bowl needs to come off for balancing or bearing work.<\/p>","protected":false},"author":10,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"class_list":["post-3048","page","type-page","status-publish","hentry"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 5.0.1.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 5.0.1.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"es_ES\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Sentrimax Centrifuges -\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Why Is My Decanter Centrifuge Vibrating? | Sentrimax\" \/>\n\t\t<meta property=\"og:description\" content=\"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png\" \/>\n\t\t<meta property=\"og:image:width\" content=\"384\" \/>\n\t\t<meta property=\"og:image:height\" content=\"128\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-09-12T00:24:02+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-09-12T00:24:02+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Why Is My Decanter Centrifuge Vibrating? | Sentrimax\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/sentrimax.com\\\/es\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#listItem\",\"name\":\"Why Is My Decanter Centrifuge Vibrating?\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#listItem\",\"position\":2,\"name\":\"Why Is My Decanter Centrifuge Vibrating?\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/#organization\",\"name\":\"Sentrimax Centrifuges\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/wp-content\\\/uploads\\\/2025\\\/05\\\/Group-1-1.png\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#organizationLogo\",\"width\":384,\"height\":128},\"image\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#organizationLogo\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#webpage\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/\",\"name\":\"Why Is My Decanter Centrifuge Vibrating? | Sentrimax\",\"description\":\"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.\",\"inLanguage\":\"es-ES\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/decanter-centrifuge-vibration\\\/#breadcrumblist\"},\"datePublished\":\"2026-09-12T00:24:02+00:00\",\"dateModified\":\"2026-09-12T00:24:02+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/\",\"name\":\"Sentrimax Centrifuges\",\"inLanguage\":\"es-ES\",\"publisher\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/es\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Why Is My Decanter Centrifuge Vibrating? | Sentrimax","description":"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.","canonical_url":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/es#listItem","position":1,"name":"Home","item":"https:\/\/sentrimax.com\/es","nextItem":{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#listItem","name":"Why Is My Decanter Centrifuge Vibrating?"}},{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#listItem","position":2,"name":"Why Is My Decanter Centrifuge Vibrating?","previousItem":{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/es#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/sentrimax.com\/es\/#organization","name":"Sentrimax Centrifuges","url":"https:\/\/sentrimax.com\/es\/","logo":{"@type":"ImageObject","url":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png","@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#organizationLogo","width":384,"height":128},"image":{"@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#organizationLogo"}},{"@type":"WebPage","@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#webpage","url":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/","name":"Why Is My Decanter Centrifuge Vibrating? | Sentrimax","description":"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.","inLanguage":"es-ES","isPartOf":{"@id":"https:\/\/sentrimax.com\/es\/#website"},"breadcrumb":{"@id":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/#breadcrumblist"},"datePublished":"2026-09-12T00:24:02+00:00","dateModified":"2026-09-12T00:24:02+00:00"},{"@type":"WebSite","@id":"https:\/\/sentrimax.com\/es\/#website","url":"https:\/\/sentrimax.com\/es\/","name":"Sentrimax Centrifuges","inLanguage":"es-ES","publisher":{"@id":"https:\/\/sentrimax.com\/es\/#organization"}}]},"og:locale":"es_ES","og:site_name":"Sentrimax Centrifuges -","og:type":"article","og:title":"Why Is My Decanter Centrifuge Vibrating? | Sentrimax","og:description":"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.","og:url":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/","og:image":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png","og:image:secure_url":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png","og:image:width":384,"og:image:height":128,"article:published_time":"2026-09-12T00:24:02+00:00","article:modified_time":"2026-09-12T00:24:02+00:00","twitter:card":"summary_large_image","twitter:title":"Why Is My Decanter Centrifuge Vibrating? | Sentrimax","twitter:description":"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.","twitter:image":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png"},"aioseo_meta_data":{"post_id":"3048","title":"Why Is My Decanter Centrifuge Vibrating? | Sentrimax","description":"Vibration in a decanter centrifuge points to imbalance, bearing wear or cake build-up. Learn how to tell the causes apart and when to stop the machine.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_custom_url":null,"og_image_custom_fields":null,"og_image_url":null,"og_image_width":null,"og_image_height":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_image_url":null,"twitter_title":null,"twitter_description":null,"schema_type":"default","schema_type_options":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"WebPage","isEnabled":true},"graphs":[]},"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null,"created":"2026-09-12 00:24:02","updated":"2026-09-12 00:36:06","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/sentrimax.com\/es\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tWhy Is My Decanter Centrifuge Vibrating?\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/sentrimax.com\/es"},{"label":"Why Is My Decanter Centrifuge Vibrating?","link":"https:\/\/sentrimax.com\/es\/decanter-centrifuge-vibration\/"}],"_links":{"self":[{"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/pages\/3048","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/comments?post=3048"}],"version-history":[{"count":0,"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/pages\/3048\/revisions"}],"wp:attachment":[{"href":"https:\/\/sentrimax.com\/es\/wp-json\/wp\/v2\/media?parent=3048"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}