{"id":3052,"date":"2026-09-12T00:24:02","date_gmt":"2026-09-12T00:24:02","guid":{"rendered":"https:\/\/sentrimax.com\/identify-centrifuge-model\/"},"modified":"2026-09-12T00:24:02","modified_gmt":"2026-09-12T00:24:02","slug":"identify-centrifuge-model","status":"publish","type":"page","link":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/","title":{"rendered":"How Do I Identify My Centrifuge Model and Parts?"},"content":{"rendered":"<p><!-- SX-AIU:START --><\/p>\n<div class=\"sx-content\">\n<nav class=\"sx-crumb\" aria-label=\"chapelure\"><a href=\"\/fr\/centrifuge-parts\/\">Decanter Centrifuge Parts<\/a> \u203a <span>How Do I Identify My Centrifuge Model and Parts?<\/span><\/nav>\n<p class=\"sx-answer\">Most decanter centrifuges carry a manufacturer nameplate on the gearbox housing, main frame or bowl casing listing model designation, serial number and bowl diameter. Where a nameplate is missing, measuring bowl diameter directly and noting scroll and gearbox configuration lets Sentrimax identify the model family and quote parts or service accurately.<\/p>\n<h2>Why accurate identification matters more than it seems<\/h2>\n<p>A parts or service quote is only as good as the model information behind it. Decanter<br \/>\ncentrifuges are sold in families that share a frame size but differ in bowl length, scroll<br \/>\nconfiguration, gearbox ratio and materials of construction, so &#8220;it&#8217;s a Sharples&#8221; or &#8220;it&#8217;s about<br \/>\n14 inches&#8221; is rarely enough to quote a part with confidence. Getting the nameplate details or<br \/>\nphysical measurements right the first time avoids a round of back-and-forth before a quote can be<br \/>\nissued.<\/p>\n<h2>Where to find the nameplate<\/h2>\n<p>Nameplate location varies by manufacturer and machine age, but on most decanter and tricanter<br \/>\ncentrifuges it is mounted in one of a small number of predictable places:<\/p>\n<ul class=\"sx-check\">\n<li>On the gearbox housing, often on a flat machined face near the input shaft<\/li>\n<li>On the main frame or base, typically on a side panel near the feed end<\/li>\n<li>Stamped or riveted directly onto the bowl casing on older or smaller machines<\/li>\n<li>On a control panel or junction box for machines where the original frame plate has been<br \/>\nlost or overpainted<\/li>\n<\/ul>\n<p>A legible nameplate should show the manufacturer name, a model designation, a serial number,<br \/>\nand in many cases bowl diameter or frame size directly. Photograph the full plate, including any<br \/>\nstamped numbers that are hard to read in person, since a photograph can often be enlarged and<br \/>\nread more clearly than the plate itself under shop lighting.<\/p>\n<div class=\"sx-warn\">\n<h3>When the nameplate is missing or illegible<\/h3>\n<p>Do not guess at a model designation from memory or from a purchase order written years ago;<br \/>\ncentrifuges are sometimes relocated, rebuilt on a different frame, or sold used with mismatched<br \/>\npaperwork. If the nameplate is gone, corroded or painted over, physical measurement is more<br \/>\nreliable than a remembered model name.<\/p>\n<\/div>\n<h2>Measuring bowl diameter without a nameplate<\/h2>\n<p>Bowl diameter is the single most useful physical measurement for narrowing down a model family,<br \/>\nsince Sentrimax and most manufacturers organize model lines around bowl diameter classes across<br \/>\nthe 8 to 43 inch range this equipment is built in. To measure it:<\/p>\n<ol class=\"sx-steps\">\n<li><strong>Isolate and lock out the machine.<\/strong> Bowl diameter should only be measured with<br \/>\nthe centrifuge fully shut down and locked out, not estimated while it is stationary but still<br \/>\nconnected to power.<\/li>\n<li><strong>Access the bowl through an inspection point or by removing the cover.<\/strong> Most<br \/>\nframes have an inspection door or removable guard that exposes the bowl without a full teardown.<\/li>\n<li><strong>Measure the outside diameter of the cylindrical bowl section<\/strong>, not the<br \/>\nconical end or the frame housing around it, using a tape measure or calipers depending on<br \/>\naccess.<\/li>\n<li><strong>Record bowl length alongside diameter<\/strong> if it is easy to measure, since some<br \/>\nmodel families share a bowl diameter but differ in length.<\/li>\n<li><strong>Note the gearbox type<\/strong> visible on the machine, such as whether it is a<br \/>\nplanetary unit, a CYCLO-style gearbox, or a hydraulic backdrive, since this narrows the model<br \/>\nfamily further.<\/li>\n<\/ol>\n<h2>How model families are named across major brands<\/h2>\n<p>Naming conventions differ by manufacturer, but most follow a recognizable pattern once you know<br \/>\nwhat to look for. Sharples, for example, has used designations like PM-95000 that combine a<br \/>\nproduct line prefix with a numeric size code. Alfa Laval&#8217;s decanter lines include names such as<br \/>\nAldec 506 and the G2-100, where the numeric portion typically relates to frame or bowl size.<br \/>\nTomoe uses designations such as TDM-50, and Bird has used frame codes like 24&#215;60 that describe<br \/>\nbowl dimensions directly in the model name. GEA&#8217;s decanter equipment, including machines<br \/>\noriginally built under the Westfalia name, and other legacy brands such as Hutchison Hayes,<br \/>\nSWACO&#8217;s 518 and 414 series, and the Lynx 40 and Lynx 500 lines, follow their own internal<br \/>\nnumbering that Sentrimax can typically match from bowl diameter, frame style and gearbox<br \/>\nconfiguration even without a fully legible nameplate.<\/p>\n<p>The practical takeaway is that a numeric code on a nameplate or frame casting is rarely<br \/>\narbitrary. Photographing every stamped or cast number you can find on the machine, not just the<br \/>\nmain nameplate, gives Sentrimax more to work with than a single unclear plate.<\/p>\n<div class=\"sx-spec\">\n<dl>\n<dt>Bowl diameter range Sentrimax services<\/dt>\n<dd>8 inches to 43 inches<\/dd>\n<dt>Centrifuge types<\/dt>\n<dd>Decanter, tricanter and disc stack<\/dd>\n<dt>Gearbox types identified<\/dt>\n<dd>Planetary (2- and 3-stage), CYCLO gearboxes, hydraulic backdrives<\/dd>\n<dt>Brands supported<\/dt>\n<dd>Sharples, Flottweg, Centrisys, Derrick, GEA, Alfa Laval, Tomoe, Andritz, Bird, Pieralisi and others<\/dd>\n<\/dl>\n<\/div>\n<h2>Why bowl diameter matters more than overall machine footprint<\/h2>\n<p>It is tempting to describe a centrifuge by its overall size \u2014 &#8220;it&#8217;s a big one&#8221; or &#8220;about the<br \/>\nsize of a small car&#8221; \u2014 but overall footprint includes the frame, motor, gearbox and guarding, none<br \/>\nof which scale in direct proportion to the bowl itself. Two machines with a similar overall<br \/>\nfootprint can have meaningfully different bowl diameters depending on frame design, and two<br \/>\nmachines with the same bowl diameter can look quite different in overall size depending on<br \/>\ngearbox type and mounting. Bowl diameter is the dimension manufacturers actually use to organize<br \/>\nmodel families, which is why it is worth the extra effort to measure directly rather than<br \/>\nestimate from the machine&#8217;s general size.<\/p>\n<h2>Common identification mistakes worth avoiding<\/h2>\n<ul class=\"sx-check\">\n<li>Quoting the model from an old purchase order or maintenance log without confirming it against<br \/>\nthe machine currently installed \u2014 used equipment is sometimes relocated or rebuilt on a different<br \/>\nframe after the paperwork was written<\/li>\n<li>Estimating bowl diameter by eye rather than measuring it, which is rarely accurate enough for a<br \/>\nparts fit<\/li>\n<li>Reading only the most visible number on a nameplate and assuming it is the model designation,<br \/>\nwhen it may be a serial number, a manufacturing date code, or a customer asset tag instead<\/li>\n<li>Sending a photograph of the nameplate that is too blurry or too far away to read the stamped<br \/>\ncharacters clearly<\/li>\n<\/ul>\n<h2>What Sentrimax does with your submission<\/h2>\n<p>Once a nameplate photograph or set of measurements comes in, Sentrimax cross-references the<br \/>\nmanufacturer, model designation or measured bowl diameter and gearbox type against known model<br \/>\nfamilies to confirm the specific configuration before quoting. Where the details point to more<br \/>\nthan one possible variant within a family, Sentrimax will ask for one or two additional<br \/>\nmeasurements or photographs rather than guess, since an incorrect assumption at this stage is the<br \/>\nmost common cause of a part that does not fit on arrival.<\/p>\n<h2>What to send for a fast, accurate quote<\/h2>\n<p>Once identification is done, a useful quote request includes: a photograph of the full<br \/>\nnameplate, or of every stamped number found if there is no plate; the measured bowl diameter and,<br \/>\nif possible, bowl length; the visible gearbox type; and a description or photograph of the part<br \/>\nneeded, or the symptom being diagnosed if the request is for service rather than parts. This is<br \/>\nthe same information that speeds up ordering from <a href=\"\/fr\/centrifuge-parts\/\">Sentrimax&#8217;s<br \/>\ndecanter centrifuge parts program<\/a> and applies equally to the wear parts covered in<br \/>\n<a href=\"\/fr\/centrifuge-wear-parts\/\">the guide to which centrifuge wear parts fail most often<\/a>.<\/p>\n<h2>Identifying a centrifuge that has changed hands<\/h2>\n<p>Used centrifuges are bought, sold and relocated between plants more often than new machines,<br \/>\nand paperwork does not always travel with the equipment. A machine purchased secondhand may carry<br \/>\na nameplate from its original owner, a rebuild tag from an intermediate repair shop, or no<br \/>\nidentifying information at all if it was stripped for resale. In these cases, treat the physical<br \/>\nmachine as the authoritative source, not any paperwork that came with it, and rely on measurement<br \/>\nand photographs of what is actually installed rather than a bill of sale description.<\/p>\n<h2>Recording identification once, for next time<\/h2>\n<p>Once a centrifuge has been identified, it is worth keeping that record on file at the plant \u2014<br \/>\nmodel designation, bowl diameter, gearbox type and serial number \u2014 rather than repeating the<br \/>\nidentification process from scratch at the next parts order or service call. A simple photograph<br \/>\nof the nameplate stored with the equipment&#8217;s maintenance file removes this step entirely for<br \/>\nfuture requests, whether they go to Sentrimax or elsewhere.<\/p>\n<h2>Identification and the OEM-versus-aftermarket decision<\/h2>\n<p>Correct identification also matters when deciding how to source a replacement part. A part<br \/>\nthat is a close but not exact dimensional match because the model was misidentified will<br \/>\nunder-perform regardless of whether it came from the original manufacturer or an aftermarket<br \/>\nsupplier. See <a href=\"\/fr\/aftermarket-vs-oem-centrifuge-parts\/\">Sentrimax&#8217;s guide to aftermarket<br \/>\nversus OEM centrifuge parts<\/a> for what to demand as evidence once the model is correctly<br \/>\nidentified.<\/p>\n<h2>Identification for disc stack centrifuges<\/h2>\n<p>Disc stack centrifuges, which Sentrimax also services alongside decanter and tricanter<br \/>\nmachines, use a different physical configuration than a decanter but follow the same<br \/>\nidentification logic: a manufacturer nameplate is the fastest route to an accurate identification,<br \/>\nand where it is missing, physical measurements of the bowl and disc stack assembly combined with<br \/>\nphotographs of the drive configuration let Sentrimax narrow down the model. The same guidance<br \/>\nabove about avoiding assumptions from paperwork alone applies equally here.<\/p>\n<h2>Why this step pays off beyond the current order<\/h2>\n<p>Time spent identifying a centrifuge accurately is not just for the immediate parts or service<br \/>\nrequest. Once the model is confirmed, that information applies to every future order for the same<br \/>\nmachine, which is why keeping the record on file, as noted above, compounds in usefulness over the<br \/>\nlife of the equipment rather than being a one-time task.<\/p>\n<h2>Send a nameplate photo for identification<\/h2>\n<p>If you are not confident about a manual read of the nameplate or measurements, send a<br \/>\nphotograph and Sentrimax will confirm the model family before you order.<\/p>\n<section class=\"sx-faq\">\n<h2>Foire aux questions<\/h2>\n<details>\n<summary>What if my centrifuge has no nameplate at all?<\/summary>\n<div class=\"sx-faq-a\">\n<p>Measure bowl diameter and length, note the gearbox type, and photograph any stamped or cast numbers on the frame, bowl casing or gearbox housing. Sentrimax can often narrow down the model family from these physical characteristics even without a legible or existing nameplate.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Can I identify my model just from the manufacturer name and a rough size estimate?<\/summary>\n<div class=\"sx-faq-a\">\n<p>Not reliably. Manufacturers typically run several model families within a similar size range, and a rough estimate is not precise enough to confirm dimensional fit on a part. An actual bowl diameter measurement or a legible nameplate photograph gives a far more accurate starting point.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Is it safe to open an inspection cover to check bowl diameter myself?<\/summary>\n<div class=\"sx-faq-a\">\n<p>Only after the machine has been fully isolated and locked out according to your plant&#039;s procedures. Most frames have an inspection point that allows a diameter measurement without a full teardown, but the centrifuge should never be opened while it could still be energized or under residual motion.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Does the gearbox type help identify the centrifuge model?<\/summary>\n<div class=\"sx-faq-a\">\n<p>Yes. Gearbox configuration, such as a planetary 2- or 3-stage unit, a CYCLO gearbox, or a hydraulic backdrive, is often specific to certain model families and narrows down the possibilities significantly when combined with bowl diameter.<\/p>\n<\/div>\n<\/details>\n<details>\n<summary>Why does Sentrimax ask for photos instead of just the model number I give them?<\/summary>\n<div class=\"sx-faq-a\">\n<p>A verbal or written model number is sometimes transcribed incorrectly, especially on older paperwork, or refers to a machine that has since been rebuilt on a different frame. A clear nameplate photograph removes that ambiguity and lets Sentrimax confirm the exact specification before quoting.<\/p>\n<\/div>\n<\/details>\n<\/section>\n<section class=\"sx-cta\">\n<h2>Parlez \u00e0 un sp\u00e9cialiste des centrifugeuses<\/h2>\n<p>Envoyez-nous les d\u00e9tails de la machine et nous vous ferons parvenir un devis et une description du p\u00e9rim\u00e8tre d&#039;inspection.<\/p>\n<p><a class=\"sx-btn\" href=\"\/fr\/parts\/\">Send your nameplate photo for identification<\/a><\/section>\n<\/div>\n<p><!-- SX-AIU:END --><\/p>","protected":false},"excerpt":{"rendered":"<p>Most decanter centrifuges carry a manufacturer nameplate on the gearbox housing, main frame or bowl casing listing model designation, serial number and bowl diameter. Where a nameplate is missing, measuring bowl diameter directly and noting scroll and gearbox configuration lets Sentrimax identify the model family and quote parts or service accurately.<\/p>","protected":false},"author":10,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"class_list":["post-3052","page","type-page","status-publish","hentry"],"acf":[],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 5.0.1.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 5.0.1.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"fr_FR\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Sentrimax Centrifuges -\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"How to Identify Your Centrifuge Model | Sentrimax\" \/>\n\t\t<meta property=\"og:description\" content=\"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png\" \/>\n\t\t<meta property=\"og:image:width\" content=\"384\" \/>\n\t\t<meta property=\"og:image:height\" content=\"128\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-09-12T00:24:02+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-09-12T00:24:02+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"How to Identify Your Centrifuge Model | Sentrimax\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/sentrimax.com\\\/fr\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#listItem\",\"name\":\"How Do I Identify My Centrifuge Model and Parts?\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#listItem\",\"position\":2,\"name\":\"How Do I Identify My Centrifuge Model and Parts?\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/#organization\",\"name\":\"Sentrimax Centrifuges\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/wp-content\\\/uploads\\\/2025\\\/05\\\/Group-1-1.png\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#organizationLogo\",\"width\":384,\"height\":128},\"image\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#organizationLogo\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#webpage\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/\",\"name\":\"How to Identify Your Centrifuge Model | Sentrimax\",\"description\":\"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.\",\"inLanguage\":\"fr-FR\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/identify-centrifuge-model\\\/#breadcrumblist\"},\"datePublished\":\"2026-09-12T00:24:02+00:00\",\"dateModified\":\"2026-09-12T00:24:02+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/#website\",\"url\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/\",\"name\":\"Sentrimax Centrifuges\",\"inLanguage\":\"fr-FR\",\"publisher\":{\"@id\":\"https:\\\/\\\/sentrimax.com\\\/fr\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"How to Identify Your Centrifuge Model | Sentrimax","description":"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.","canonical_url":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/fr#listItem","position":1,"name":"Home","item":"https:\/\/sentrimax.com\/fr","nextItem":{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#listItem","name":"How Do I Identify My Centrifuge Model and Parts?"}},{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#listItem","position":2,"name":"How Do I Identify My Centrifuge Model and Parts?","previousItem":{"@type":"ListItem","@id":"https:\/\/sentrimax.com\/fr#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/sentrimax.com\/fr\/#organization","name":"Sentrimax Centrifuges","url":"https:\/\/sentrimax.com\/fr\/","logo":{"@type":"ImageObject","url":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png","@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#organizationLogo","width":384,"height":128},"image":{"@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#organizationLogo"}},{"@type":"WebPage","@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#webpage","url":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/","name":"How to Identify Your Centrifuge Model | Sentrimax","description":"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.","inLanguage":"fr-FR","isPartOf":{"@id":"https:\/\/sentrimax.com\/fr\/#website"},"breadcrumb":{"@id":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/#breadcrumblist"},"datePublished":"2026-09-12T00:24:02+00:00","dateModified":"2026-09-12T00:24:02+00:00"},{"@type":"WebSite","@id":"https:\/\/sentrimax.com\/fr\/#website","url":"https:\/\/sentrimax.com\/fr\/","name":"Sentrimax Centrifuges","inLanguage":"fr-FR","publisher":{"@id":"https:\/\/sentrimax.com\/fr\/#organization"}}]},"og:locale":"fr_FR","og:site_name":"Sentrimax Centrifuges -","og:type":"article","og:title":"How to Identify Your Centrifuge Model | Sentrimax","og:description":"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.","og:url":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/","og:image":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png","og:image:secure_url":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png","og:image:width":384,"og:image:height":128,"article:published_time":"2026-09-12T00:24:02+00:00","article:modified_time":"2026-09-12T00:24:02+00:00","twitter:card":"summary_large_image","twitter:title":"How to Identify Your Centrifuge Model | Sentrimax","twitter:description":"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.","twitter:image":"https:\/\/sentrimax.com\/wp-content\/uploads\/2025\/05\/Group-1-1.png"},"aioseo_meta_data":{"post_id":"3052","title":"How to Identify Your Centrifuge Model | Sentrimax","description":"Find your centrifuge nameplate, measure bowl diameter correctly, and learn how model families are named across major brands so parts quotes are accurate.","keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_custom_url":null,"og_image_custom_fields":null,"og_image_url":null,"og_image_width":null,"og_image_height":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_image_url":null,"twitter_title":null,"twitter_description":null,"schema_type":"default","schema_type_options":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"WebPage","isEnabled":true},"graphs":[]},"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null,"created":"2026-09-12 00:24:02","updated":"2026-09-12 00:36:06","focus_keyword":null,"additional_keywords":null,"truseo_locale":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/sentrimax.com\/fr\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tHow Do I Identify My Centrifuge Model and Parts?\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/sentrimax.com\/fr"},{"label":"How Do I Identify My Centrifuge Model and Parts?","link":"https:\/\/sentrimax.com\/fr\/identify-centrifuge-model\/"}],"_links":{"self":[{"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/pages\/3052","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/comments?post=3052"}],"version-history":[{"count":0,"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/pages\/3052\/revisions"}],"wp:attachment":[{"href":"https:\/\/sentrimax.com\/fr\/wp-json\/wp\/v2\/media?parent=3052"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}